CD-Rom is the place to read input from the incoming data as a CD. This type of CD-Rom vary include: CD-R, CD-RW, DVD-R, DVD-RW. In reading data CD-R has different capabilities from 8x to 52x. The more level the faster the speed of the same in reading. Types of data cables used for CD-Rom that is diverse, there are three types were: SATA, ATA, and IDE. In trouble shooting a CD-Rom easily diagnosed because they have the cirri as follows:
1. Unable to read input when the CD is inserted
2. Error message appears when the computer is turned on initial boot
3. Read entries with a very long pross
4. Beep uncertain
To overcome the above we can perform the following manner:
- Turn off the computer and check the data cable and the jumper plug on the position of Master
- Turn the computer back and if kesalahn still appears try to replace with another data cable
- If the error still appears alagi try to come up with another CD-Rom that can still be used
- If the CD-Rom sounds uncertain possibility of error in the head so it needs to be replaced with another
- If the error still appears more likely the socket on the mainboard has an error so it can be replaced with another
1. Unable to read input when the CD is inserted
2. Error message appears when the computer is turned on initial boot
3. Read entries with a very long pross
4. Beep uncertain
To overcome the above we can perform the following manner:
- Turn off the computer and check the data cable and the jumper plug on the position of Master
- Turn the computer back and if kesalahn still appears try to replace with another data cable
- If the error still appears alagi try to come up with another CD-Rom that can still be used
- If the CD-Rom sounds uncertain possibility of error in the head so it needs to be replaced with another
- If the error still appears more likely the socket on the mainboard has an error so it can be replaced with another
Comments (0)
Post a Comment